9-PORT 10/100M PD SWITCH

No electrical wiring is needed, allowing flexibility in placement and design of network solutions such as Wireless Access Points

9-PORT 10/100M PD SWITCH (POE36008P)

Today's network operators benefit from implementing Power over Ethernet (PoE) technology. No electrical wiring is needed, allowing flexibility in placement and design of network solutions such as Wireless Access Points and IP cameras.While typical PoE switches are designed to deliver power to remote network devices, the multi-port PD-Switch from ONV Networks accepts PoE, acting as an IEEE802.3af compliant Powered Device (PD). With the PD-Switch, operators can now extend the 100 meter range of their copper-based networks an additional 100 meters, without costly and complex electrical rewiring.

Product features PD-Switches come equipped with either "PD" RJ-45 port 9 10/100 Mbps Ports with AutoUplink™ Distances: 100 meters on 10/100 twisted pair Full wire speed on all egress ports. Supports PoE IEEE 802.3af compliant PDs Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode 1K entry MAC address table of the PoE Switch POE31008P with auto-learning and auto-aging LED indicators for monitoring power, link, activity and speed External power adapter supply 

Target IndustriesHD monitor transmission and power supplyWireless AP layout transmission and power supplyNetwork telephone transmission , intelligent house and homesystemIntelligent transportation supervisory system(ITS) High-speed Way supervisory/Tele-Communication System Security protection system, TV medical treatment Long-distance Muti-media Schooling, Campus monitoring Long-distance broadcast television transmission system High-building Security Protection, Military Tele-Com projects

Specifications

Product	9-PORT 10/100 PD SWITCH WITH 8-PORT POE
Type	POE36008P
Network Ports	9 10/100Mbps RJ45 PortsAUTO Negotiation/AUTO MDI/MDIX
Power Pin Assignment	Data provided over pairs over 1/2and 3/6 ,Power overspare pairs4/5(+) and 7/8 (-)
PoE Distance	100m
Transmission Method	Store-And-Forward
Network Media	10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
	100BASE-TX: UTP category 5, 5e cable (maximum 100m)
Performance Specifications	Bandwidth:1.6 Gbps
	Network latency:Less than 20 μs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission
	Buffer memory:96 KB embedded memory per unit
	Address database size:1,000 media access control (MAC) addresses per system
	Addressing:48-bit MAC address
	Mean Time Between Failure (MTBF):190,000 hours (~ 21 years)
	Acoustic Noise: 0 dB
Network Protocol and Standards	IEEE 802.3i 10BASET
	IEEE 802.3u 100BASETX
	IEEE 802.3x Flow Control
	IEEE 802.1af DTE Power via MDI
	IEEE 802.3af
Status LEDs	System: Power, PoE Maximum Power
	Per Port: Link, Activity, Speed, PoE Active, PoE Fault
Physical Specifications	Dimensions (H x W x D):189 x 102 x28mm
	Weight:0.65kg
Environmental Specifications	Operating temperature: 0 to 55°C
	Storage temperature: -20 to 75°C
	Operating humidity: 90% maximum relative humidity, non-condensing
	Storage humidity: 95% maximum relative humidity, non-condensing
	Operating altitude: 10,000 ft (3,000 m) maximum
	Storage altitude: 10,000 ft (3,000 m) maximum
Electromagnetic Emissions	CE mark, commercial
	FCC Part 15 Class B
	VCCI Class B
	EN 55022 (CISPR 22), Class B
Safety	CE Mark ,commercial
	CE/LVD EN60950
Warranty	1 years for PoE Switch
Package Contents	9-PORT 10/100M PD SWITCH WITH 8-PORT POE (POE36008P)
	Installation guide
	Warranty/Support Information card

Order Information:

Product:POE36008P  Type:9-PORT 10/100M PD SWITCH WITH 8-PORT POEPower Pin Assignment:Data provided over pairs over 1/2and 3/6 ,Power over spare pairs4/5(+) and 7/8 (-)

Accessories in the package:

Package Contents	9-PORT 10/100M PD SWITCH WITH 8-PORT POE (POE36008P)
	Installation guide
	Warranty/Support Information card

Product size(mm):189 x 102 x28mm

9-PORT 10/100M PD SWITCH